|
|
| |
|
 |
|
| ㆍPrecaution |
|
- CPU and motherboard are subject to damage if the product is incorrectly installed. Familiarize yourself with this “USER’S MANUAL” before installing the product.
- Expressive force may result in malfunction or damage to the fan, the product or the computer. Avoid inserting any objects into the fan while operating.
- The product is only compatible with Intel LGA 775 socket. The product can cover up to 65W thermal road. CPU and motherboard are subject to damage if the product is used for Intel CoreTM2 Quad or Intel Pentium 4 CPUs whose thermal load is over 65W.
- APACK Inc. is not responsible for any damage to the product, and/or the computer including CPU resulted from
1) Incorrect installation
2) CPU over-clocking
|
| |
| ㆍWarranty & Disclainer |
|
- Warranty : 2 years from the purchase date
- APACK Inc. is not responsible for any damage due to external causes, including but not limited to, improper use, problem with electrical pwer, accident, neglect, alteration, repair, incorrect installation, or improper testing.
- www.ZEROtherm.net / www.APACK.net
- support@apack.net
|
| |
| ㆍComponents |
|
|
|
|
| ㆍSpecifications |
|
| ㆍModel |
ATOM 30H |
|
| ㆍDimension (L x W x H) |
96(L) x 86(W) x 30(H)
mm
|
| 3.78(L) x 3.39(W) x 1.18(H)
Inch |
|
| ㆍHeatsink Material |
| Fin |
Aluminum |
|
| Base |
Copper |
|
| Heatpipe |
Copper (Sintered Type) |
|
|
| ㆍHeat Dissipation Area |
1,177 ㎠ |
|
| ㆍCooling Capacity |
65W |
|
| ㆍFan Size |
80 x 10 mm / 3.15 x 0.39 Inch |
|
| ㆍFan Speed |
1,500 ~ 2,500 rpm |
|
| ㆍAcoustical Noise |
Under 29 dBA (± 10%) |
|
| ㆍAir Flow |
Max. 29.2
CFM (0.83m3/min) |
|
| ㆍFan Connector |
4-Pin PWM |
|
| ㆍOperation Voltage |
10.8 ~ 13.2 VDC |
|
| ㆍComsuming Power |
Max 1.4W |
|
| ㆍWeight |
357g (w/o optional components) |
|
|
|
| ㆍEasy to use |
|
 |
- Supports almost all PC cases
including slim-type PC cases
|
|
| ㆍEasy Installation - Install CPU Cooler |
|
 |
- The CPU Surface must be cleaned Properly
- Evenly Apply thermal Grease on the CPU
|
 |
- Install CPU Cooler
- Place the product on the top of the CPU, making sure that the four plastic fasteners match the holes on the motherboard.
|
 |
- The 4 plastic fasteners must first be aligned back in their original position. If not, please turn the plastic head clockwise.
|
 |
- Press the plastic clip downwards until it clicks into the hole. Fasten the diagonal opposite clips together.
|
 |
- Attach the power plug onto the power socket on the motherboard.
- [Caution] Keep all cables inside the computer case clear from the fan by fixing them with cable ties.
|
|
| |
| ㆍHow to Install the "Push Pin" |
|
|
| ㆍHow to remove "Push Pin" |
|
|
|
|
|
|
|
|
|
|
|
|
|
